Description: LabRAM HR2/399 (HORIBA Jobin Yvon) Raman microscopy unit with excitation wavelengths (and power at a sample, mW) of 229, 266, 405 (2), 475 (3,8), 532 (22), 633, and 785 (22) nm equipped with 600, 1800, and 2400 lines/mm gratings and 10x, 50x, and 100x objective lenses.
Description: Stopped-flow spectrometer SX20, Applied Photophysics; laser flash photolysis spectrometer LKS60, Applied Photophysics.
Description: Varian Cary Eclipse with thermostated 4-cuvette holder.
Description: BMG Labtech Clariostar Plus with long-term shaking, Bottom optic, Incubation up to 65°C, and Ultra-fast UV/Vis Absorbance Spectrometer upgrades.
Description: Shimadzu UFLC, include two low volume (<10ml/min) pumps and one high volume (<150 ml/min) 4-channel pump, fraction collector, autosampler, column oven, UV/Vis and DAD detectors.
Description: Multiple electrochemical workstations including Zahner model Zennium Pro, a modular electrochemical workstation including a potentiostat / galvanostat and a frequency response analyzer (FRA) unit with a frequency range up to 8 MHz at ±3 A and at a compliance voltage of up to ±28 V. With an input impedance of more than 10 TΩ || 5 pF. Also, an extension module RMUX is available, allowing up to 16 separate measuring channels.
Description: Surface Plasmon Resonance Spectroscopy (Autolab, Twingle) - protein-Ligand association, proteins (peptides) interaction with phospholipids bilayers, biomolecules adsorption investigation. Major characteristics: baseline noise < 0.0001 degeree. Refractive index interval from 1.30 to 1.55, Refractive index resolution 10-6; Sensor material - BK-7; Dynamic range 4 degrees.
Description: The KJLC PVD 75 is a magnetron sputter deposition tool for depositing conductive metallic films under pressure control. Major technical characteristics: chamber volume is 75 liters; sampler holder - 30 cm in diameter; magnetron target size (diameter) 50.8 mm wit the deposition chimney; heating up to 350 ˚C; basic chamber pressure 2x10-7 Torr.
Description: Contact angle measuring system (EasyDrop, Kruss) is used to measure the contact angle of a droplet contact with a solid surface. Major technical characteristics: contact angle measurements in 1-180 degree range. Angle resolution 0.1 degree. Positioning - mechanical.
